 |
Aluminum billet machined part being
inspected on 5 axis CNC mill. Parts can be inspected with the same CAD model
used in engineering. |
 |
CNC precision machine tools require proper
geometry setup and calibration to maintain their productivity
and accuracy. The
tracker does this very well. |
 |
Manual machine tools can be checked as
readily as CNC machines. Geometry and DRO are quickly verified. |
 |
Alignment or "dialing in" of parts
that are larger than a machines normal capacity is a snap. This can greatly increase
machine productivity and part accuracy. |
 |
3-D surface profiles can be checked
against the original CAD model to insure that the desired end result has been
achieved. Complex contours are quickly inspected. |
 |
Profile and contour results are presented in
easy to understand graphical, spread sheet, or text formats. Reports can be customized to
fit your needs. |
 |
Large scale objects can be measured with
extreme accuracy by using strategic relocation techniques. There are no size limitations,
it's totally portable. |
 |
Complex, tight tolerance assemblies and
tooling. Using the Tracker has saved countless man hours in re-work and material costs.
parts can be inspected at multiple vendor sites with one single tool. |
 |
High speed turbines often
distort badly due to high temperatures and work loads. We can map out
the distortions to allow repositioning of internal components back to
required positions. |
 |
Panel pocket profile
inspections became a snap when the Tracker got involved. Voice
recognition and wireless remote features allow the data to be
collected quickly and efficiently. |
 |
Large scale contoured
molds that often were left un-inspected, for lack of a proper way, can
now be accurately checked with ease. Portability truly shows to be a
major advantage in cost savings. Live time functionality also lets
reshaping be done on the fly. |
 |
Commercial aerospace is cutting production costs substantially using pre and post-fit
inspection procedures that prove the parts are correct before they
make it into service. This also increases the safety of air travel. |
 |
A multitude of information is gathered
when inspecting rotating equipment such as turbines, generators,
pumps, engines, etc. The tracker is an excellent replacement for
conventional methods of inspection. |
|
|
